1. Purchase order shall specify not less than the fllowin AMS2417K
●Plating thickness, itf other than specified in 3.4.2.3
●Type and Grade designation (see 1.3)
●Basis metal to be plated
●Tensile strength or hardness of the basis metal
●If pre-plate stress relief (time and temperature) is to be performed by plating processor and if diferent from 3.1.1
●If steel parts were machined, ground, cold formed or straightened after heat treatment (3.1.1.1)
●If steel parts have been shot peened, specify if required stress relief has been completed (3.1.1.1.3)
●Special features, geometry or processing present on parts that requires special atention by the plating processor
●Pmisible eletrical contact locatins, i not specified (3.1.3)
●Optional: Plating bath frmlation (3.2.1.1)
●Hydrogen etiritlement rlel to be performed by plating pocessor (parameters or reference documnent) if dferent from 3.3
●Plated nickel composition if ifferent from 3.4.1
